Catalog

Dust Collectors, Filters


The main task of a filter is to filter the air by cleaning the air flow from impurities. Our air filters are designed for various types of production plants that require different air filtration levels. These filters may be used in various production and woodworking plants and properly connected to the air duct systems. We offer sleeve filters, filters with chain mechanism, rotary valve filters as well as screw filters that are designed for filtration of extremely high volumes of air. Sleeve filters, filters with chain mechanism, rotary valve filters, and screw filters are mostly used in various types of industrial facilities. These filters are used to extract the dust generated from production of plastic, metal, wood, or food, processing of gypsum, grain, or polyester as well as sand.  

Filter FM/FMT
Filter FM/FMT

The air filtration unit FM/FMT

The air filtration unit FM/FMT is most practical and economical choise for collection of a variety of industrial dust in production, where exists a need for large filtering surface. This units is a good solution for dust and fine particle collection, if the workload is not too intense. The main advantages of the filtration unit-it is easy to instal, simply to use and with large filtering surface. Air filtration unit FM/FMT is made of 1,5-2 mm galvanised metal sheets, with 50 filtering elements and 4 garbage bags. Filtring elements are made of antistatic poliester material (400 gr./m²). Cleaning of the FMT filter filtering elements take place with the help of vibro motor installed above them.

Tehniskā specifikācija(.PDF)
Read more
Filter FJI
Filter FJI

FJI jet filter with scraper

FJI filtration device is designed for separating wood dust from air and for temporary storing this wood dust. Filtration device can be used in both positive and negative pressure systems. Device is equipped with either compressed air cleaning system. Volume of the material storage up to 8 m³. Various discharge options are available for the device: pneumatic transport, contaner, bags, briquette press. Device is manufactured from 2-4 mm zinc plated metal sheets that make the construction exceptionally durable. Option for feeding the warm air back to the workshop. If necessary the filtration system can be combined with blast trapdoor.

Tehniskā specifikācija(.PDF)
Read more
FSB Filter
FSB Filter

Filter Super Blover

Filter Super Blover is a continuous operation sleeve filter which may be used both as a positive and negative pressure filter. Filter elements are placed into a special metal frame allowing the filter to withstand very large loads.

Tehniska specifikācija (pdf)
Read more
 FB Filter
FB Filter

Filter Blover

Filter Blover is a continuous operation sleeve filter which may be used both as a positive and negative pressure filter. Filter elements are placed into a special metal frame allowing the filter to withstand large loads.

Tehniska specifikācija (pdf)
Read more
Filter FJG
Filter FJG

Filtering device with screw conveyor FJG

The FJG filtering device with compressed air purification system and worm screw conveyor is intended for separating wood dust from air. FJG can be adjusted for the needs of any manufacturing, because it is possible to increase the number of modules of the filtering device. The device module is manufactured mainly from 2-4 mm thick zinc-plated metal sheets, making the design light and very durable. The filtering device can be used both in positive and in negative pressure systems. It is possible to feed the purified air back to the workshop. Upon request it is possible to combine the filtering system with explosion vents (hatches).

Tehniskā specifikācija(.PDF)
Read more
Filter FJK
Filter FJK

Filtering device with chain conveyor FJK

The filtering device with compressed air purification system and chain conveyor FJK intended for separating wood dust from air. The filter is used for removing large amount of dust by suction and for air filtration; the number of modules of the filtering device can be increased as necessary. The device module is manufactured from 2-4 mm thick zinc-plated metal sheets, making the design light and very durable. The discharging of the collected material mass from the filter is performed by using a chain conveyor with 0,55 kW geare motor, that transports materials to the lower part of the filter to discharge them out of the filter.

Tehniskā specifikācija(.PDF)
Read more
Filter FVS
Filter FVS

FVS filter with cleaning fans and rotary valve

FVS is a filter used to remove wood or other dust from air. The design can consist of 3-4 modules, allowing the customer to choose the size and power required. The filter is made of 1.5-3 mm galvanized metal sheets, which makes the structure very durable. The sleeve filters are made of antistatic polyester material (400 gr./m²) using spring rings in the filter housing. The filter is cleaned using cleaning fans. The separated dust is removed from the filter by a rotary valve.

Recommended material loading per filter m²

Dry wood dust 100-140 m³ / h

Wet wood dust 80-100 m³ / h

Chipboard dust 75-90 m³ / h

Paper dust 75-90 m³ / h

Plastic dust 50-75 m³ / h

Textile dust 40-60 m³/h

Tehniskā specifikācija(.PDF)
Read more
Filter FTI
Filter FTI

Filter FTI with vibro motor and scraper.

FTI is a filter used to remove wood or other dust from air. The filter is cleaned using vibro motor. The separated dust is removed from the filter by scraper and screw conveyor. FTI filter is made of 1.5-3 mm galvanized metal sheets, which makes the structure very durable. The sleeve filters are made of antistatic polyester material (400 gr./m²) using spring rings in the filter housing.

Tehniskā specifikācija(.PDF)
Read more
Filter FVG
Filter FVG

FVG filter with cleaning fans and screw conveyor

FVG is a filter used to remove wood or other dust from air. The design can consist of 3-11 modules, allowing the customer to choose the size and power required. The filter is made of 1.5-3 mm galvanized metal sheets, which makes the structure very durable. The equipment is installed outdoors. The sleeve filters are made of antistatic polyester material (400 gr./m²) using spring rings in the filter housing. The filter is cleaned using cleaning fans. The separated dust is removed from the filter by a screw conveyor.

Recommended material loading per filter m²

Dry wood dust 100-140 m³ / h

Wet wood dust 80-100 m³ / h

Chipboard dust 75-90 m³ / h

Paper dust 75-90 m³ / h

Plastic dust 50-75 m³ / h

Textile dust 40-60 m³/h

Tehniskā specifikācija(.PDF)
Read more
Copyright © MPP LTD, 2017. All rights reserved.